Epoxy resin anti-corrosion steel pipe

1. Composition: 1. Steel pipe: seamless steel pipe, straight seam steel pipe, spiral steel pipe and other steel pipes

2. Epoxy resin coating This product is a two-component, high-solids coating made of epoxy resin as the main agent. Divided into primer and topcoat. Component A consists of epoxy resin, pigments, additives and additives. Component B is a curing agent formulated with modified amines [1].

2. Features and application areas:

Durability is good, the paint film after epoxy resin curing is tough and water resistant, the coating film is non-toxic, and has no pollution to water.

Strong adhesion, good adhesion between paint film and paint film. It has excellent anti-rust and water-resistance performance, and uses excellent anti-rust materials to ensure its anti-rust performance. It has good mechanical strength, tough paint film, wear resistance and impact resistance. The solid content is high and the coating film is thick. The film is cured at room temperature. No large baking equipment is required.

It is widely used in the inner wall coating of drinking water tanks, water pipes, water tanks, water towers and other water supply equipment and in the cargo tanks of sugar and grain. It can also be used as the inner wall coating of swimming pools, power plant cooling towers and metal and concrete filled with fuel oil and gasoline.

3. Construction and storage:

   1) The dust, oil, oxide scale, etc. on the surface of the object must be cleaned before painting. Reach Sa 2.5 level to ensure the quality of painting. Moisture is strictly prohibited during construction.

   2) The construction proportioning method is: open the mouth of the component A, add the component B to the component A, and mix well. After 30 minutes of aging, it can be painted.

   3) This material is required to be used as soon as it is matched, and the paint after the ratio must be used up within eight hours. Unfinished materials should be sealed and stored. Construction should be stopped in rainy days or when the relative temperature is greater than 75%. For parts with severe corrosive media, it is recommended to apply multiple brushes.

  4) The product should be stored in a cool and dry place to prevent direct sunlight, isolate the fire source, and stay away from the heat source. The storage period is twelve months, and various technical indicators should be inspected after the period expires. If the indicators meet the requirements, they can continue to be used.